Intelligent terminal machine

Smart terminal machine

Fully automatic terminal machine is a more convenient machine, we should also know this, fully automatic mechanical equipment Those with greater help can save a lot of labor and increase the output of the factory. It can also help the factory to temporarily relieve the problem of not being able to find workers. However, we are also using the fully automatic terminal machine when we use it. There will be a problem. Some time-division automatic terminal machines will have relatively loud noises after being used for a period of time. We should all be aware of this! So what are the specific reasons for the formation?

After the processing of a wire of the smart terminal machine is completed, a label shall be affixed to the rubber cone, and the model of the ultra-quiet terminal machine used for the wire, the specifications of the wire and quantity. In addition, for the same kind of wire processing, after the ultra-quiet terminal machine is continuously operated for 1 hour, it is necessary to recheck to confirm the length of the wire opening and stripping and whether the wire opening effect is qualified, and then continue production after confirming the qualification. Ensure the quality of each batch of ultra-quiet terminal machine. You can try the terminal machine operation method of Dongguan Julun Machinery Co., Ltd.

Generally, it is normal to have fine noise. If it is a loud one, then there are these two problems, a. There is abrasion between certain parts and components of the terminal machine, which leads to increased conflicts; b. The screw of the terminal machine is loose during work, causing the parts to vibrate and become rugged.

We provide more than just simple production equipmentUltra-quiet terminal machine, technical guidance for processing and teaching guidance for on-site craftsmanship are also required. Aiming at the current Dongguan ultra-fine coaxial line processing laser wire stripping machine. The laser wire stripping machine uses laser to strip the wire, which is the laser in the material. The processing of ultra-fine coaxial wire laser wire stripping belongs to the micro processing technology. Improve customer output and product qualification rate. Ultra-fine coaxial line laser wire stripping machine, sinking anode thin coaxial line processing technology belongs to micro-processing technology,

For such problems, what we have to do is to find a solution. If we want to prevent the terminal machine from being disturbed by noise, we must first choose a reasonable tool and improve its installation accuracy. ; At the same time, we must improve the cutting process of the terminal machine. If it is a slender workpiece, try to choose ninety degrees for cutting. In this way, the noise problem of the terminal machine should be alleviated.

Smart terminal machine

The smart terminal machine is conductive, so the key point is that too tight will break the copper wire or directly break the blade. If it is loose, it will let the terminal and the wire This part is easy to fall off, you can do it more, I think you will be familiar with this one, if you have done the operation and still don’t understand, you can call: 0769-87883409 Dongguan Julun Machinery Co., Ltd. We are a professional terminal machine, stripping The wire machine manufacturer will definitely let you understand the debugging method of the terminal machine

The daily maintenance precautions of the automatic terminal machine have been introduced here. You can learn more about it, and we should pay more attention to it when we use it. This is for us There is better assistance. Be careful when using the automatic terminal machine. If you need to buy automatic terminal machines, automatic pipe cutting machines, corrugated pipe cutting machines and other mechanical equipment, you can call Contact us, and we also have punctured terminals, terminal molds, terminal copper strips and other accessories, please contact us if you have any needs

Smart terminal machine

If the relay is broken, the ultra-quiet terminal machine is always hitting it. If the inverter main board of the ultra-quiet terminal machine is not broken, it means the relay is faulty. How to set the mute terminal inverter inverter. The terminal machine inverter made by each manufacturer is different, you can refer to the manual to set it up. Shenyang ultra-quiet terminal machine will not move after a long time. Look at the terminal machine motor and pedal. Is there something wrong with the circuit? It is possible that the copper sleeve is stuck, so try adding some oil.

It is necessary to add butter to the crimping part of the automatic terminal machine every week, and apply it evenly on the surface of the high-speed bearing and around the pressure block

The smart terminal machine realizes "ultra-high-speed processing" of fully automatic crimping at both ends of 9000 pieces per hour! Equipped with standard equipment for pressure testing! The ultra-quiet terminal machine "Simple|Small" has unprecedented performance and amazing processing capabilities. It is a next-generation fully automatic crimping machine that has completely changed the concept of wire processing machines. This model has original ideas and creations, which not only improves the performance of the machine, but also reduces the burden on the operators through the simplification of operating procedures and die exchange. In addition, from the operator's point of view, the ultra-quiet terminal machine has greatly reduced the size and realized the miniaturization of the accessories, saving space.

Smart terminal machine

Smart terminal machine

If the machine is abnormal during operation of the ultra-quiet terminal machine. And ask the mechanics for maintenance and debugging in time, and turn off the power first. Non-designated personnel are strictly prohibited to prevent safety problems during maintenance. Debug or disassemble machine parts without permission. Be sure to turn off the power of the machine during maintenance and debugging. Clean Shenyang automatic terminal machine after use. In order to remove the debris, dust and excess oil on the surface of the ultra-quiet terminal machine; the operator must clean the machine every day. When using ultra-quiet terminal machines. Oil lubrication can be added once every 12 hours, if it is found that the stamping guide rail of the terminal machine is not lubricated. 2-3 drops is appropriate; at the same time, the main speed bearing of the terminal machine must be greased every week: the maintenance during such use is not to add too much oil each time.