Silent terminal machine inspection method

To check whether the terminal is qualified, it needs to go through a terminal cross-section analyzer. The process is divided into: cutting-grinding and polishing-electrolysis (corrosion)-investigation. The use method of the active terminal machine The active terminal machine is simple and convenient to use. It only needs to be worn, the terminal mold is set up, and the parameters are set in the screen to produce.

Briefly describe the various characteristics and introduction of the terminal machine

The definition of silent terminal machine

refers to a machine that can actively press the hardware head until the wire is broken and turned on.

Classification of silent terminal machine

Active terminal machines can be divided into pneumatic terminal machines,Ultra-quiet terminal machine,All-round terminal machine, continuous terminal cutting PIN machine, evenStripping and punching terminal machine,Semi-active ultra-quiet terminal machine, wire cutting and stripping machine, terminal machine, stripping machine, small diamond terminal machine, series motor stator terminal machine, computer wire active stripping machine, pin terminal machine , Gold wire terminal machine, etc.

Electronic wire processing is a kind of processing that is frequently used and contrasted today. Nowadays, there are many types and standards of wires in shopping malls, so you can take a look when choosing electronic wire processing A few things to note:

It depends on the insulation layer to see if the core is located in the middle of the insulation layer. What is not in the center is the eccentric scene formed by the low technology. If the power is small, the wind and the waves can be calm during use. Once the power consumption is large, the thinner side is likely to be broken down by the current

The selection of electronic wires and wires must be purchased from high-quality brands in the mall, and you can rest assured that there is a certain well-known brand in the mall. Now I will teach you how to judge the quality of the wire, depending on whether the length and the thickness of the wire core are tampered with. According to the relevant standards, the error of wire length cannot exceed 5%, and the cross-section wire diameter cannot exceed 0.02%. However, there are many shortcomings in length and bluffing on the cross-section (such as those with a cross-section of 2.5 square millimeters). Line, in fact, it is only 2 square millimeters thick).

Electronic wire processing is widely used nowadays, it is usually used in weak current projects, such as internal wiring of electronic and electrical equipment, etc.

Its high temperature resistance: (minus 190 degrees to 300 degrees), flame resistance, non-melting; low thermal expansion coefficient: aramid fiber reinforced fiber optic cable strengthened core in a wide temperature range, The coefficient of linear expansion is smaller than the reinforced core of steel wire and glass fiber reinforced optical cable; light weight and high strength: DuPont Kevlar fiber reinforced optical cable reinforced core has low density and high strength, and its specific strength and specific modulus far surpass the reinforced core of steel wire and glass fiber reinforced optical cable; /span>